Cresta Digital
Cresta Ws
Full modality set on split ports including ReSaliX saline bipolar.
Cresta Ws is the Digital full-platform configuration: monopolar, bipolar, SureBind vessel sealing, and ReSaliX saline bipolar on split bipolar and vessel sealer ports.
The brochure power table confirms vessel sealer and saline bipolar wattages on this variant. SafeTis, ContactIQ, and TURiCUT-capable monopolar modes cover urology, gynaecology, and general surgery under saline or open conditions.
Key highlights
- Monopolar, bipolar, vessel sealer, saline bipolar
- Split port configuration
- ReSaliX saline activation
- 7-segment LED interface
- Saline bipolar Cut 300 W
- Ordering code LF90127
Specifications
| Parameter | Value |
|---|---|
| Outputs | One Monopolar, One Bipolar, Vessel Sealer, Saline Bipolar |
| Display | 7-segment LED |
| Port configuration | Split (Bipolar and Vessel Sealer) |
| Vessel Sealer | Yes |
| Saline Bipolar | Yes |
| Saline Bipolar Cut | 300 W |
| Ordering code | LF90127 |
| Weight | <10kg |
| Dimension (W x D x H) | 410mm x 160mm x 480mm |
| Input Supply voltage & frequency | 230V ± 10%, 50Hz |
| Operating Temperature range | +10°C to 40°C |
| Operating Relative Humidity | 15% to 85% non-condensing |
| Operating Atmospheric pressure | 700 to 1060 millibars |
| Transport & Storage Temp range | -10°C to +60°C |
| Transport & Storage Humidity | 15% to 90% |
| Transport & Storage Pressure | 500 to 1060 millibars |
Power modes
| Mode | Max Settings | Vpk-pk | Rated Load | Max Power in Watts | Crest Factor |
|---|---|---|---|---|---|
| MONOPOLAR CUT / Pure Cut | 300 | 3100 V | 500 Ω | 300 W | 1.4 |
| MONOPOLAR CUT / Blend 1 | 250 | 3300 V | 500 Ω | 250 W | 2.0 |
| MONOPOLAR COAG / Spray | 80 | 6000 V | 300 Ω | 80 W | 6.5 |
| BIPOLAR / Cut | 120 | 800 V @ 500 Ω | 100 Ω | 120 W | 1.4 |
| VESSEL SEALER / Low | L2 | 300 V @ 150 Ω | - | 110 W | 1.4 |
| VESSEL SEALER / High | H2 | 450 V @ 150 Ω | - | 150 W | 1.4 |
| SALINE BIPOLAR / Cut | L6 | 1500 V | 100 Ω | 300 W | 1.4 |
| SALINE BIPOLAR / Coag | L6 | 950 V | 100 Ω | 250 W | 1.4 |
- The ratings mentioned above are maximum ratings.
- All output power values are available in ±20%; peak voltage and crest factors change accordingly.
- Power can be lowered during surgery by selecting appropriate settings.
- Always use the lowest power setting that achieves the desired surgical effect.
- Vessel Sealer power is modulated.